Flowing and self levelling screed
Screed Pumped In. Job Done in Hours, Not Days.
NextFlow pumps flowing screed straight to your subfloor, so there's no barrows, no bucket brigades and no bottlenecks. One call gets you a level, trafficable floor that's ready for the next trade.
We pump flowing and self levelling screed into floors across Greater Sydney
Trusted by builders, flooring contractors and homeowners across Greater Sydney
We supply and mix the cement, sand and screed on site as part of the job.
The problem
Traditional screeding means a crew mixing and laying material by hand, bay by bay. On a big slab that's days of labour, and if the mix isn't consistent from batch to batch you end up with an uneven finish. Worse, every trade behind you, tilers, floor layers, underfloor heating installers, is stuck waiting until your floor is done.
The solution
NextFlow's pump trucks mix and pump screed right there on site, sending it through hose straight to where it's needed, across the slab, up multiple floors, or into rooms a wheelbarrow could never get to. The result is a consistent, self levelling or semi dry screed laid in a fraction of the time, with a flatter finish and far less risk of cold joints or an inconsistent mix.
Why builders put us on the program
Speed that keeps your build on schedule.
What takes a hand laid crew days, our pump crews can finish in hours. That means your program stays intact, and the trades lined up behind you aren't left standing around waiting.
A flatter, more consistent finish.
Every batch is mixed to the same ratio and pumped at a steady pressure, so there's no dry patches, no soft spots and no callbacks to fix a bad section later.
Reach that gets you out of tight spots.
Long hose runs mean we can pump screed up to the top floor, into a tight courtyard, or onto a site with no truck access at all, without a single wheelbarrow trip.
Built for underfloor heating and acoustic systems.
Flowing screed is the standard choice over hydronic and electric underfloor heating, and we pump it evenly around the pipework and battens without disturbing the layout.
What our customers say
Feedback from builders, contractors and homeowners we've pumped for.
“Really impressed with the service. The team arrived on time, set everything up quickly and completed the screed pumping without any issues. The finish was smooth and made the next stage of our flooring project much easier.”
“The whole process was simple and professional. We had underfloor heating installed and needed the screed pumped efficiently. The team knew exactly what they were doing and completed the job faster than we expected.”
“Great communication from start to finish. The team was professional, careful on site and left everything clean after completing the work. I would definitely use them again for future projects.”
How it works
Four steps from your first call to a finished pour.
Send us the job
Call or send through your job details. Slab size, access, timing, and whether it's residential or commercial.
Quote and date locked in
We quote and lock in a date, usually within days rather than weeks.
Truck sets up, hose runs in
The pump truck arrives and sets up, running hose to the pour zone no matter how tight the access is.
Pumped, levelled, cleaned up
Screed is mixed and pumped on site, laid and levelled and left ready to cure, with the crew cleaning up before they head off.
Who this is for
If your job looks like one of these, we've done it before.
Builders and developers pouring subfloors on apartment blocks or multi level projects with a tight program
Flooring and tiling contractors who need a dead flat base before their trade starts
Renovators and homeowners replacing or levelling a floor before new flooring goes down
Underfloor heating installers who need screed pumped evenly over hydronic or electric systems
Questions we get asked
How much does screed pumping cost?
It depends on your floor area, the type of screed and how easy the site is to access. Call 0405 935 775 or send through your plans and we'll give you a free quote, no obligation attached.
How long does pumped screed take to cure before I can walk on it?
That depends on the screed type and thickness. Our crew will talk you through exact curing and walk on times for your job before we leave site.
Can you pump screed to upper floors or tight spaces?
Yes. Long hose runs mean we can reach upper floors, internal courtyards, and sites with no direct truck access.
Do you supply the screed mix, or do I need to arrange materials?
We supply and mix the cement, sand and screed on site as part of the job, so one call covers both materials and labour.
What areas do you service?
We service all across Greater Sydney and surrounding suburbs.
Need material pumped to your site?
Tell us about your project and our team will help you find the right pumping solution.
Stop Waiting on a Hand Laid Floor
Get your subfloor pumped, level and ready for the next trade, usually within days of your call.
Flow That Delivers